Product Description
Sheenlac water base interior wood polish is a PU based heavy duty polish with a glossy or matt finish that dries quickly to a crystal clear film.
Application Method:
Fresh Wood - On bare wood sand with grain using #120 grit and finish with #220 grit emery paper. Wood must be clean, dry and free of grease, oil and any combination. Fill dents, pores with Sheenlac water base paste wood filler to create a smooth closed grain surface. To get the desired colour use solvent or water base wood stains and allow to dry for 2 hours. Sand mildly using #320 grit.
Application Method:
Fresh Wood - On bare wood sand with grain using #120 grit and finish with #220 grit emery paper. Wood must be clean, dry and free of grease, oil and any combination. Fill dents, pores with Sheenlac water base paste wood filler to create a smooth closed grain surface. To get the desired colour use solvent or water base wood stains and allow to dry for 2 hours. Sand mildly using #320 grit.
- Dilute WB wood polish with 40-50% potable water for ragging or brush application. Use 30% water for spray application
- Touch dry in 20 minutesand re-coat after 1-2 hours. Lower tempratures will prolong dry time for 2-3 hours.
- Apply minimum 3 coats. Additional coats can be applied for desired finish.