AQ 3 IN 1 TOP COAT EXTERIOR BURUMA TEAK 4LTR EWX89

5 in Stock

SKU
007165
Brand
Causeway Paints
Quick Overview
DESCRIPTION
 
Causeway AQLAC 3in1 Top Coat Exterior combines rich wood stain colour and long protection to your wood in one-step conveniently. Recommended for Exterior Doors & Windows, Exterior Furniture, Wooden Decks & Sunbeds in resorts.
 
• Economical
• WaterRepellent
• UV Resistant
Special Price Rs. 7,775.00 Regular Price Rs. 15,550.00

Secured and trusted checkout with

DESCRIPTION
 
Causeway AQLAC 3in1 Top Coat Exterior combines rich wood stain colour and long protection to your wood in one-step conveniently. Recommended for Exterior Doors & Windows, Exterior Furniture, Wooden Decks & Sunbeds in resorts.
 
• Economical
• WaterRepellent
• UV Resistant
 
3 in 1 (Time Saving)
 
1. Seal
2. Stain
3. Topcoat
 
SURFACE PREPARATION
 
For Previously Stained Wood That Is Not Being Stripped
 
1.Before starting, surface must be dry, clean and free of dirt, grease and glue.
2.Sand the wood with 180-320 grit Sandpaper to ensure adhesion. Remove all sanding dust. 
 
For Stripped, Unstained or Raw Wood 
 
1.Before starting, surface must be dry, clean and free of dirt, grease andglue.
2.Sand the wood in the direction of the grain 180-320 grit sandpaper until smooth. Remove all sanding dust. 
 
• Fill gaps and defects using AQLAC Wood Putty and sand after dry to get uniform finish.
 
TECHNICAL DATA SHEET AQLAC 3 IN 1 TOP COAT
 TECHNICAL DATA
•COLOR :  Burmateak
•COMPONENTS : Single 
•FINISH : Semi Gloss
•CURING MECHNISM : Air-dry
•VISCOSITY : Ready to use
•SPECIFIC GRAVITY : 1.032g/m
•VOLUME OF SOLIDS : 40%
•THINNING : Water
•MIXING RATIO : 5% (Max – if required)
•SPRAY VISCOSITY : 20 sec 
•RECOMMENDED : 20-25µm (DFT) THICKNESS PER COAT 
•THEORETICAL : ~19 m²-20m²/ l COVERAGE (depends on substrate)
•DRYING TIME : 02-04 hours (Touch ) 24hours (Hard dry) 
•RE-COATINGINTERVAL : 04 hours
•POT LIFE : N/A 
•SHELF LIFE : best before 24 months 
•PACKING :-  4Litres

 

More Information
Manufacturer Causeway Paints
 
TECHNICAL DATA SHEET AQLAC 3 IN 1 TOP COAT
 TECHNICAL DATA
•COLOR :  Burmateak
•COMPONENTS : Single 
•FINISH : Semi Gloss
•CURING MECHNISM : Air-dry
•VISCOSITY : Ready to use
•SPECIFIC GRAVITY : 1.032g/m
•VOLUME OF SOLIDS : 40%
•THINNING : Water
•MIXING RATIO : 5% (Max – if required)
•SPRAY VISCOSITY : 20 sec 
•RECOMMENDED : 20-25µm (DFT) THICKNESS PER COAT 
•THEORETICAL : ~19 m²-20m²/ l COVERAGE (depends on substrate)
•DRYING TIME : 02-04 hours (Touch ) 24hours (Hard dry) 
•RE-COATINGINTERVAL : 04 hours
•POT LIFE : N/A 
•SHELF LIFE : best before 24 months 
•PACKING :-  4Litres