TECHNICAL DATA
o COLOR : Clear
o COMPONENTS : Single
o FINISH : Gloss / Satin
o CURING MECHANISM : Oxidation
o VISCOSITY : 120 seconds (Ford 4 )
o SPECIFIC GRAVITY : 0.900
o VOLUME OF SOLIDS : ~45%
o THINNER : Causeway Turpentine / Thinner
o MIXING RATIO : 25% (Brush) / 30% (Spray)
o SPRAY VISCOSITY : 20 seconds (Ford 4)
o RECOMMENDED THICKNESS PER COAT : 25μm (DFT)
o THEORETICAL COVERAGE : 14-15m2/L (25μm DFT)
o DRYING TIME : 2 hours (Touch dry) 24 hours (Hard dry)
o RE-COATING INTERVAL : 16 hours
o SHELF LIFE : Best before 24 months
| Manufacturer | Causeway Paints |
|---|
SURFACE PREPARATION
Ensure surfaces are clean, dry and free from dirt, grease and other contamination.
On new wood, sand surface and dust off.
Old varnished areas should be stripped well back then treated as new wood.
APPLICATION INSTRUCTIONS
Do not apply in a dusty environment.
Thin first coat up to 30% by mineral turpentine.
Apply by brush. Allow to dry for 16 hours.
Successive coats should be applied as supplied or may be thinned up to 15% with mineral turpentine.
Apply at least 3 coats of varnish to new wood.
Sand lightly between coats with 150 grit sandpaper. Dust off.