TECHNICAL DATA
o COLOR : White, Black & Yellow
o COMPONENTS : Single
o FINISH : Matt
o CURING MECHANISM : Oxidation process
o VISCOSITY : 180 sec Ford cup 4
o SPECIFIC GRAVITY : 1.450+ / -0.050
o VOLUME OF SOLIDS : Approximately 60%
o THINNER : Causeway Thinner
o MIXING RATIO : 20%
o RECOMMENDED THICKNESS PER COAT : 75μm (DFT)
o THEORETICAL COVERAGE : ~ 7m²/L (Based on 75μm DFT)
o DRYING TIME : 15 minutes (Touch dry) 02 hours (Hard dry)
o RE-COATING INTERVAL : 01 hour
o POT LIFE : N/A
o SHELF LIFE : Best before 24 months
| Manufacturer | Causeway Paints |
|---|
APPLICATION INSTRUCTIONS
- Remove any dust, oil and other contaminants that may affect its adhesive property.
- Ensure that all loose old paint flakes are removed before any application of the paint.
- Dilute the paint to the required viscosity, depending on the type of application method employed.
- Roll 2 ~ 3 coats of road marking paint allowing about 20 min of flash off time between each coat
HEALTH & SAFETY
Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks.