TECHNICAL DATA
o COLOR : Colourless / Transparent shades
o COMPONENTS : Single
o FINISH : Satin
o CURING MECHANISM : Air Dry
o VISCOSITY : 230 poise @ 300C
o SPECIFIC GRAVITY : ~ 1.000
o VOLUME OF SOLIDS : Approximately 45%
o THINNER : Causeway NC Thinner
o MIXING RATIO : 150-200% (Volume)
o SPRAY VISCOSITY : 25 sec (Ford 4)
o RECOMMENDED THICKNESS PER COAT : 25μm
o THEORETICAL : ~ 10m²/L (Based COVERAGE on 25μm DFT)
o DRYING TIME : 10 min (Touch dry) 30 min (Print free) 90 min (Sanding)
o RE-COATING INTERVAL : As per the requirement
o POT LIFE : N/A
o SHELF LIFE : 5 years (Unopened)
| Manufacturer | Causeway Paints |
|---|
EQUIPMENT GUIDE
Suction Guns - 1.8mm fluid tip at 350 kpa (50-55 psi) air pressure
Pressure Pots - 1.5mm fluid tip with dedicated pot pressure air cap at 350 kpa air pressure and pot pressure of 45 kpa (6 psi)
Airless - 9 – 13 thou fluid tip size and pump regulated to 400 kpa (50-60 psi). Viscosity dependent.
Air Assisted Airless - 9 – 13 thou fluid tip size and pump regulated to 400 kpa (50-60 psi) with air assist regulated at 70 to 90 kpa (10-15 psi). Viscosity dependent.
Curtain Coating - Check suitability of equipment and ensure viscosity is maintained at 15-25 sec. with regular addition of NC Thinner to maintain operational viscosity.