TECHNICAL DATA
o COLOR : Colourless / Transparent
o COMPONENTS : Single
o FINISH : Gloss / Satin
o CURING MECHANISM : Air Dry
o VISCOSITY : 130 poise @ 300C
o SPECIFIC GRAVITY : ~ 1.0
o VOLUME OF SOLIDS : Approximately 48%
o THINNER : Causeway NC Thinner
o MIXING RATIO : 150 - 200% (Volume)
o SPRAY VISCOSITY : 25 sec (Ford 4)
o RECOMMENDED THICKNESS PER COAT : 25μm
o THEORETICAL : ~ 20m²/L (Based COVERAGE on 25μm DFT)
o DRYING TIME : 6 minutes (Touch dry) 12 Hours (Hard dry)
o RE-COATING INTERVAL : 30 minutes
o POT LIFE : N/A
o SHELF LIFE : Best before 24 months
| Manufacturer | Causeway Paints |
|---|
EQUIPMENT GUIDE
Suction Guns - 1.8mm fluid tip at 350 kpa (50-55 psi) air pressure
Pressure Pots - 1.5mm fluid tip with dedicated pot pressure air cap at 350 kpa air pressure and pot pressure of 45 kpa (6 psi)
Airless - 9 – 13 thou fluid tip size and pump regulated to 400 kpa (50-60 psi). Viscosity dependent.
Air Assisted Airless - 9 – 13 thou fluid tip size and pump regulated to 400 kpa (50-60 psi) with air assist regulated at 70 to 90 kpa (10-15 psi). Viscosity dependent.
Curtain Coating - Check suitability of equipment and ensure viscosity is maintained at 15 – 25 sec. with regular addition of NC slow thinner to maintain operational viscosity