Composition : Based on aqueous solution of midified styrene based filmed.
Color : As to customer interest. Sensitive for high pigment used colors.
Viscosity : 10-15 cPs
Minimum Film forming temperature : 5C
Flash point : Not applicable
Surface preparation : Must be clean dry & free from dust & poorly adhering materials Grease & moss growth. Extra attention should be given for heavy Oxidizes areas
Application : Can be sprayed or use of roller or brush.
1st Coat 2 Parts of paints to 1 part of water.
2nd Coat 3 Parts of water to 1 part of water
3rd Coat 3 Parts of water to 1 part of water.
Application of 3rd coat is necessary for highly damping areas & water gathering areas. Allowing 4-6 hours between coats & applying cross directions to Previous coat. Don’t apply when rain or drew is forecast within 24 hrs or temperature falls below 18C or above 30C
Dilution : With Water
Coverage : 100 – 120 Sqft per L
Drying Time : about 72 Hours at room temperature. The drying, time required is Variable in relation to the room temperature & humidity existing at the moment of application.
Shelf Life & storage : 2 years maximum – Un opened protected from direct sunshine & Strong heat
Packing available : Drums of 200 L, buckets of 20L, 10L, 4L & canisters 1L
Warning & Suggestions : It is advisable to mix the product well before use. Reading & use of Product should be done as to the product label.
Health & Safety : Ensure good ventilation during application. Remove splashes From skin with soap & water. In case of contact with eyes rinse With water seek for medical advice. Equipment should be clened By water & leaving brushes or rollers unattended for more than 5 Minutes would cause to form drying of equipment.
Re filling of drinking , water for tanks & fish & fauna is recommended After drying 72 hrs.